Bypass PDU Recommended for Maintaining Continuous Power During UPS Maintenance
Keeping mission-critical data center equipment operating at its optimal level often means scheduled maintenance. But what if you are unable to afford the costly downtime involved in powering down for regular upkeep? This 200250V 10A single-phase hot-swap PDU works in conjunction with your UPS system to keep everything running 24/7/365. It allows you to manually transfer connected equipment to utility power via the PDUs bypass switch, permitting maintenance or equipment replacement with no interruption of performance.
Features Dual Inputs and a Manual Transfer Switch for Uninterrupted Operation
The PDUBHV101U features two C14 inlets that connect to separate UPS and utility input power sources with user-supplied power cables or the included C13-to-C14 cables. The manual transfer switch allows PDU output power to flow from either input. Flip the switch to Bypass to replace the UPS and flip back to Normal once the maintenance or UPS replacement is complete. Equipment connected to the six C13 outlets will continue to operate without interruption.
Optional ECO Switching Feature Enables Cost-Cutting Power Savings
By enabling the ECO power saving feature, you can power off a single bank of five controlled C13 outlets all at once when the device connected to the master C13 outlet is powered off or goes into a low-power consumption mode.
Mounts into 1U of Rack Space or on a Wall
Use the included mounting hardware to install the PDUBHV101Us all-metal housing into 1U of space in an EIA-standard 19-inch rack. You may also use the mounting brackets to secure the PDU to a wall.
- PDUBHV101U 200250V 10A Hot-Swap PDU
- (2) C13-to-C14 power cables
- Mounting hardware
- Owners manual
OVERVIEW
| UPC Code |
037332253095 |
| PDU Type |
Hot-Swap |
INPUT
| Input Phase |
Single-Phase |
| PDU Input Voltage |
200; 208; 220; 230; 240; 250 |
| Recommended Electrical Service |
Works with 200-250V UPS systems with C14 cmpatible input cabling |
| Maximum Input Amps |
10 |
| PDU Plug Type |
(2) IEC-320 C14 |
| Input Cord Details |
Set of two 1.5m C13-to-C14 power cables included; Supports user supplied alternate cabling |
| Input Cord Length (m) |
1.83 |
OUTPUT
| Output Capacity Details |
2kW (200V), 2.2kW (220V), 2.3kW (230V), 2.4kW (240V), 2.5kW (250V) / Total capacity 10A / 10A Max per outlet |
| Frequency Compatibility |
50 / 60 Hz |
| Output Receptacle Details |
Set of 6 output receptacles are arranged in two groups to support the optional ECO Power-Saving feature; One MASTER-outlet provides optional current-sense capability that when enabled, automatically powers off the bank of 5 CONTROLLABLE GROUP-outlets when the device connected to the MASTER-outlet is powered off or enters a low power sleep mode consuming 20W or less (±5W) |
| Output Receptacles |
(6) C13 |
| Output Nominal Voltage |
200-250V |
USER INTERFACE, ALERTS & CONTROLS
| Front Panel LEDs |
Front panel LEDs report UTILITY Input Power ON (green), BYPASS-MODE Switch Setting (yellow), MASTER Outlet Power ON (green), CONTROLLABLE GROUP Outlets Power ON (green) |
| Switches |
2 position Manual Transfer switch offers Break-Before-Make transfer between UPS and Utility operating modes with less than 8 milliseconds (typical) transfer time; Additional switch offers ENABLE/DISABLE control of the ECO Power-Saving feature |
PHYSICAL
| Material of Construction |
Metal |
| Form Factors Supported |
Includes installation accessories for wall mount and 1U horizontal rackmount installation in 2 or 4 post equipment racks |
| PDU Form Factor |
Horizontal (1U) |
| Shipping Weight (kg) |
2.77 |
| Unit Dimensions (hwd / cm) |
4.39 x 43.79 x 10.01 |
| Unit Weight (kg) |
2.36 |
ENVIRONMENTAL
| Operating Temperature Range |
32° to 104°F (0° to 40°C) |
| Storage Temperature Range |
-22° to 122°F (-30° to 50°C) |
| Relative Humidity |
5% to 95% non-condensing |
| Operating Elevation (ft.) |
0-10,000 |
| Operating Elevation (m) |
0-3000 |
FEATURES & SPECIFICATIONS
| High Availability PDU Features |
Manual Hot-Swap Bypass |
STANDARDS & COMPLIANCE
| Product Certifications |
CAN/CSA-C22.2 No. 62368-1 (Canada); NOM (Mexico); UL 62368-1 |
| Product Compliance |
RoHS; CE (Europe); UKCA |
WARRANTY & SUPPORT
| Product Warranty Period (Worldwide) |
2-year limited warranty |
