Save Now Xantrex Freedom X 3000W Inverter – 12 Volt, 120 Volt AC Output, Pure Sine Wave

3000 Watt 12 Volt DC Pure Sine Wave Inverter

The Xantrex Freedom X 3000 is a 12V pure sine wave inverter designed for mobile, marine, RV, work vehicle, and off-grid power systems that need reliable 120VAC power from a battery bank. With 3000 watts of output, a built-in transfer switch, and strong surge capability, it is well suited for powering sensitive electronics and demanding AC loads.

Product details:

• AC output operating voltage options: 120 VAC, 110 VAC, 108 VAC

• Continuous output power: 3000 W at 104°F (40°C), true sine wave

• Continuous AC output current: 25 A

• Surge power (5 seconds): 6000 W

• Output frequency (configurable): 60 Hz or 50 Hz

• AC operating voltage range: 85–140 VAC

• AC safe non operating voltage range: up to 240 VAC

• DC operating voltage range: low battery cut off at 18.0 VDC

• Maximum non operating DC voltage: 25.2 VDC

• Nominal DC voltage (inverting): 12.0 V

• Nominal DC current at full load: 288 A DC

• Peak efficiency: 91 percent

• Full load efficiency: 85 percent or greater

• Operating temperature range: minus 4°F to 140°F (minus 20°C to 60°C), output derated above 104°F (40°C)

• Storage temperature range: minus 40°F to 158°F (minus 40°C to 70°C)

• Operating humidity range: 5 to 95 percent relative humidity, non condensing

• Transfer relay AC current rating: 30 A

• Part number (hardware): 817 3000

• Part number (GFCI built in): 817 3000 11

• Dimensions without flanges: 15.4 in x 10.8 in x 4.0 in (390 mm x 275 mm x 102 mm)

• Dimensions with flanges: 15.4 in x 12.2 in x 4.0 in (390 mm x 305 mm x 102 mm)

• Net weight without GFCI: 16.5 lb (7.5 kg)

Best for:

• RV and camper power systems
• Marine and vessel electrical systems
• Work trucks and specialty vehicles
• Mobile service applications
• Off-grid and auxiliary power systems
• 12V battery banks needing 3000W pure sine wave AC output

Check before ordering:

• Confirm your system uses a 12V DC battery bank.
• Confirm you need a 3000W inverter only, not an inverter/charger.
• Verify that 120VAC output matches your application.
• Confirm the built-in transfer switch and hardwire configuration fit your installation.
• Check available installation space, ventilation, and wiring requirements.
• Confirm remote-control or monitoring accessory compatibility if needed.
• Consult a qualified technician for RV, marine, mobile, or high-current electrical installations.